Python and R

University of Oklahoma Libraries

Online

Four Consecutive Wednesdays

May 20, 27 June 3, 10, 2020

9:00am - 12:30pm

Instructors: Logan Cox (shell), Michael Malahy (python), Mark Laufersweiler (Git)

Helpers: Theo Acker, Claire Curry, Jim Ferguson, Toni Hoberecht, Krista Kezbers, Mark Laufersweiler, Mahbboeh Lesani, Tyler Pearson, Amanda Schilling, Horst Severini

Registration

Registration is required. Registration is limited to 14 learners and will remain open until filled. There is also a need for you to select your computing language preference. Make your choice for which computing language section, R or Python, that you wish to attend.

We received the required number of registrations and we will be offering both R and Python as programing lessons for this workshop.

If you find that you cannot attend, please unregister so that someone else can sign up.

General Information

Software Carpentry aims to help researchers get their work done in less time and with less pain by teaching them basic research computing skills. This hands-on workshop will cover basic concepts and tools, including program design, version control, data management, and task automation. Participants will be encouraged to help one another and to apply what they have learned to their own research problems.

Note that this workshop will take place over 4 consecutive Wednesdays May 20, 27 June 3, 10. We ask that you attend to the best of your ability all four weeks. Contact us if there is a problem and we will do our best to help accommodate.

What will be unique to this on-line workshop is that we will be offering both Python and R as programing languages. When you register, please indicate which language lesson you will want to attend. We will set a minimum of at least 4 learners will need to register in order for the session to go.

For more information on what we teach and why, please see our paper "Best Practices for Scientific Computing".

Who: The course is aimed at graduate students and other researchers. You don't need to have any previous knowledge of the tools that will be presented at the workshop.

Where: This training will take place online. The instructors will provide you with the infromation you will need to connect to this meeting.

When:

Four Consecutive Wednesdays

May 20, 27 June 3, 10, 2020

. Add to your Google Calendar.

Requirements: Participants must bring a laptop with a Mac, Linux, or Windows operating system (not a tablet, Chromebook, etc.) that they have administrative privileges on. They should have a few specific software packages installed (listed below).

Accessibility: We are dedicated to providing a positive and accessible learning environment for all. Please notify the instructors in advance of the workshop if you require any accommodations or if there is anything we can do to make this workshop more accessible to you.

Contact: Please email laufers@ou.edu for more information.


Code of Conduct

Everyone who participates in Carpentries activities is required to conform to the Code of Conduct. This document also outlines how to report an incident if needed.


Collaborative Notes

We will use this collaborative document for chatting, taking notes, and sharing URLs and bits of code.


Surveys

Please be sure to complete these surveys before and after the workshop.

Pre-workshop Survey

Post-workshop Survey


Schedule

Wednesday May 20

Before Pre-workshop survey
09:00 Automating Tasks with the Unix Shell
10:30 10 minute break
11:00 Automating Tasks with the Unix Shell (Continued)
12:15 Wrap-up

Wednesday May 27

9:00 Plotting and Programming in Python
10:30 10 minute break
11:00 Building Programs with Python (Continued)
12:15 Wrap-up

Wednesday May 27

9:00 R for Reproducible Scientific Analysis
10:30 10 minute break
11:00 R for Reproducible Scientific Analysis (Continued)
12:15 Wrap-up

Wednesday June 03

9:00 Plotting and Programming in Python
10:30 10 minute break
11:00 Building Programs with Python (Continued)
12:15 Wrap-up

Wednesday June 03

9:00 R for Reproducible Scientific Analysis
10:30 10 minute break
11:00 R for Reproducible Scientific Analysis (Continued)
12:15 Wrap-up

Wednesday June 10

09:00 Version Control with Git and GitHub
10:30 10 minute break
11:00 Version Control with GitHub
12:15 Post-workshop Survey
12:20 wrap up

Syllabus

The Unix Shell

  • Files and Directories
  • History and Tab Completion
  • Pipes and Redirection
  • Looping Over Files
  • Creating and Running Shell Scripts
  • Finding Things
  • Reference...

Programming in Python

  • Using Libraries
  • Working with Arrays
  • Reading and Plotting Data
  • Creating and Using Functions
  • Loops and Conditionals
  • Defensive Programming
  • Using Python from the Command Line
  • Reference...

Programming in R

  • Working with Vectors and Data Frames
  • Reading and Plotting Data
  • Creating and Using Functions
  • Loops and Conditionals
  • Using R from the Command Line
  • Reference...

Version Control with Git

  • Creating a Repository
  • Recording Changes to Files: add, commit, ...
  • Viewing Changes: status, diff, ...
  • Ignoring Files
  • Working on the Web: clone, pull, push, ...
  • Resolving Conflicts
  • Open Licenses
  • Where to Host Work, and Why
  • Reference...

Setup

To participate in a Software Carpentry workshop, you will need access to the software described below. In addition, you will need an up-to-date web browser.

We maintain a list of common issues that occur during installation as a reference for instructors that may be useful on the Configuration Problems and Solutions wiki page.

The Bash Shell

Bash is a commonly-used shell that gives you the power to do simple tasks more quickly.

Video Tutorial
  1. Download the Git for Windows installer.
  2. Run the installer and follow the steps below:
    1. Click on "Next" four times (two times if you've previously installed Git). You don't need to change anything in the Information, location, components, and start menu screens.
    2. From the dropdown menu select "Use the nano editor by default" and click on "Next".
    3. Ensure that "Git from the command line and also from 3rd-party software" is selected and click on "Next". (If you don't do this Git Bash will not work properly, requiring you to remove the Git Bash installation, re-run the installer and to select the "Git from the command line and also from 3rd-party software" option.)
    4. Ensure that "Use the native Windows Secure Channel library" is selected and click on "Next".
    5. Ensure that "Checkout Windows-style, commit Unix-style line endings" is selected and click on "Next".
    6. Ensure that "Use Windows' default console window" is selected and click on "Next".
    7. Ensure that "Enable file system caching" and "Enable Git Credential Manager" are selected and click on "Next".
    8. Click on "Install".
    9. Click on "Finish".
  3. If your "HOME" environment variable is not set (or you don't know what this is):
    1. Open command prompt (Open Start Menu then type cmd and press [Enter])
    2. Type the following line into the command prompt window exactly as shown:

      setx HOME "%USERPROFILE%"

    3. Press [Enter], you should see SUCCESS: Specified value was saved.
    4. Quit command prompt by typing exit then pressing [Enter]

This will provide you with both Git and Bash in the Git Bash program.

The default shell in some versions of macOS is Bash, and Bash is available in all versions, so no need to install anything. You access Bash from the Terminal (found in /Applications/Utilities). See the Git installation video tutorial for an example on how to open the Terminal. You may want to keep Terminal in your dock for this workshop.

To see if your default shell is Bash type echo $SHELL in Terminal and press the enter/return key. If the message printed does not end with '/bash' then your default is something else and you can run Bash by typing bash.

The default shell is usually Bash and there is usually no need to install anything.

To see if your default shell is Bash type echo $SHELL in a terminal and press the enter/return key. If the message printed does not end with '/bash' then your default is something else and you can run Bash by typing bash.

Git

Git is a version control system that lets you track who made changes to what when and has options for easily updating a shared or public version of your code on github.com. You will need a supported web browser.

You will need an account at github.com for parts of the Git lesson. Basic GitHub accounts are free. We encourage you to create a GitHub account if you don't have one already. Please consider what personal information you'd like to reveal. For example, you may want to review these instructions for keeping your email address private provided at GitHub.

Git should be installed on your computer as part of your Bash install (described above).

Video Tutorial

For OS X 10.9 and higher, install Git for Mac by downloading and running the most recent "mavericks" installer from this list. Because this installer is not signed by the developer, you may have to right click (control click) on the .pkg file, click Open, and click Open on the pop up window. After installing Git, there will not be anything in your /Applications folder, as Git is a command line program. For older versions of OS X (10.5-10.8) use the most recent available installer labelled "snow-leopard" available here.

If Git is not already available on your machine you can try to install it via your distro's package manager. For Debian/Ubuntu run sudo apt-get install git and for Fedora run sudo dnf install git.

Text Editor

When you're writing code, it's nice to have a text editor that is optimized for writing code, with features like automatic color-coding of key words. The default text editor on macOS and Linux is usually set to Vim, which is not famous for being intuitive. If you accidentally find yourself stuck in it, hit the Esc key, followed by :+Q+! (colon, lower-case 'q', exclamation mark), then hitting Return to return to the shell.

nano is a basic editor and the default that instructors use in the workshop. It is installed along with Git.

Others editors that you can use are Notepad++ or Sublime Text. Be aware that you must add its installation directory to your system path. Please ask your instructor to help you do this.

nano is a basic editor and the default that instructors use in the workshop. See the Git installation video tutorial for an example on how to open nano. It should be pre-installed.

Others editors that you can use are BBEdit or Sublime Text.

nano is a basic editor and the default that instructors use in the workshop. It should be pre-installed.

Others editors that you can use are Gedit, Kate or Sublime Text.

Python

Python is a popular language for research computing, and great for general-purpose programming as well. Installing all of its research packages individually can be a bit difficult, so we recommend Anaconda, an all-in-one installer.

Regardless of how you choose to install it, please make sure you install Python version 3.x (e.g., 3.6 is fine).

We will teach Python using the Jupyter Notebook, a programming environment that runs in a web browser (Jupyter Notebook will be installed by Anaconda). For this to work you will need a reasonably up-to-date browser. The current versions of the Chrome, Safari and Firefox browsers are all supported (some older browsers, including Internet Explorer version 9 and below, are not).

Video Tutorial
  1. Open https://www.anaconda.com/distribution/#download-section with your web browser.
  2. Download the Anaconda for Windows installer with Python 3. (If you are not sure which version to choose, you probably want the 64-bit Graphical Installer Anaconda3-...-Windows-x86_64.exe)
  3. Install Python 3 by running the Anaconda Installer, using all of the defaults for installation except make sure to check Add Anaconda to my PATH environment variable.
  1. Open https://www.anaconda.com/distribution/#download-section with your web browser.
  2. Download the Anaconda Installer with Python 3 for Linux.
    (The installation requires using the shell. If you aren't comfortable doing the installation yourself stop here and request help at the workshop.)
  3. Open a terminal window and navigate to the directory where the executable is downloaded (e.g., `cd ~/Downloads`).
  4. Type
    bash Anaconda3-
    and then press Tab to autocomplete the full file name. The name of file you just downloaded should appear.
  5. Press Enter. You will follow the text-only prompts. To move through the text, press Spacebar. Type yes and press enter to approve the license. Press Enter to approve the default location for the files. Type yes and press Enter to prepend Anaconda to your PATH (this makes the Anaconda distribution the default Python).
  6. Close the terminal window.

R

R is a programming language that is especially powerful for data exploration, visualization, and statistical analysis. To interact with R, we use RStudio.

Video Tutorial

Install R by downloading and running this .exe file from CRAN. Also, please install the RStudio IDE. Note that if you have separate user and admin accounts, you should run the installers as administrator (right-click on .exe file and select "Run as administrator" instead of double-clicking). Otherwise problems may occur later, for example when installing R packages.

You can download the binary files for your distribution from CRAN. Or you can use your package manager (e.g. for Debian/Ubuntu run sudo apt-get install r-base and for Fedora run sudo dnf install R). Also, please install the RStudio IDE.